手順3に変更
- Blake Kleinによって編集
承認済みの編集 : Blake Klein
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Using a metal spudger, |
|---|---|
| + | [* black] Using a metal spudger, work your way around the perimeter of the main board and screen. |
| [* icon_note] There is a lot of adhesive between the two pieces, so be careful to try to remove the adhesive slowly in order to not break anything. | |
| - | [* icon_note] If there seems to be too much adhesive. The adhesive's effect can be lessened by applying heat. This can be done by a blow dryer. |