この手順に変更
- Lucas Donahueによって編集
承認済みの編集 : Lucas Donahue
- 前
- 後
- 変更なし
手順ライン
| [* black] Replace back panel. Make sure the metal part of the panel goes under the metal part of the rotating arm or the screw won't go in. | |
| - | [* |
| + | [* red] Put the four screws back in from step 2 and 3 respectively. |
| [* red] Step 2 screws go in the outside of the panel. Step 3 screws go in on the underside of the panel. |