手順14に変更
- 101 Tech USAによって編集
承認済みの編集 : 101 Tech USA
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Remove the trigger and trigger spring. |
| + | [* black] Using a #00 Phillips screwdriver, remove the small screw holding the wire harness in place. |
| + | [* black] Remove the wire harness by unhooking the trigger plunger spring, then lifting the harness up from the top, and then sliding it upwards. |