手順2に変更
手順ライン
| - | [* black] Desolder the wire just below the power button on the motherboard. Use a pair of needle nose tweezers to pull the electrode out of the board after the solder is completely melted. |
|---|---|
| + | [* black] Desolder the wire just below the power button on the motherboard. Use a pair of needle nose [product|IF145-020|tweezers] to pull the electrode out of the board after the solder is completely melted. |
| [* black] Do the same with the solder pad just above the black diamond-shaped component. Remove the electrode with a pair of tweezers. |