パーツ

パーツは必要ありません。

  1. Use a J00 screwdriver to unscrew the 10 back-plate screws.
    • Use a J00 screwdriver to unscrew the 10 back-plate screws.

  2. Using light pressure, slowly wiggle off the back panel.
    • Using light pressure, slowly wiggle off the back panel.

    • Locate the speaker modules on the back of the laptop.

    • Gently pry the speakers out of the plastic casing using your finger or the blue plastic pry tool.

    • Gently pull out the speaker wire connector from the motherboard.

    • Unwrap the wires from their holders and remove the speaker modules.

    • When re-inserting the speakers, make sure the wires are correctly wrapped around the plastic holders, and that the speaker wire goes underneath the touch pad connector wire, as it was before.

まとめ

To reassemble your device, follow these instructions in reverse order.

Parish Brandt

メンバー登録日: 2018年09月21日

615 ポイント

5のガイドは作成済み

チーム

University of North Texas, Team S1-G5, Riccardelli Fall 2018 University of North Texas, Team S1-G5, Riccardelli Fall 2018人のメンバー

UNT-RICCARDELLI-F18S1G5

4 メンバー

5のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 43

今までの合計 58