Philips Norelco OneBlade Servo Motor Replacement

Joshua Etchberger とその他 2 人の作成者

最終更新日: November 11, 2024

5 - 10 分

中レベル

より良い紹介部分

必要な工具と部品

パーツ

Replacement Servo Motor

ツール

Soldering Workstation
Sale price $49.99
表示する

手順1 Servo Motor

Philips Norelco OneBlade Servo Motor Replacement, Servo Motor: 手順 1、 3の画像 1

Philips Norelco OneBlade Servo Motor Replacement, Servo Motor: 手順 1、 3の画像 2

Philips Norelco OneBlade Servo Motor Replacement, Servo Motor: 手順 1、 3の画像 3

Ensure razor is off and razor blade has been removed.

編集

手順2

Locate crease in bottom third of razor.
Hold razor in both hands, and place thumbs near crease.
Slightly bend the razor near crease.
Pull casing apart.
Device may turn on upon removal. Turn off razor before continuing.

編集

手順3

Philips Norelco OneBlade Servo Motor Replacement: 手順 3、 3の画像 3

Locate wires below motor on either side of circuit board.
Remove solder from each joint using solder removal kit.
Do not attempt to remove wires by force.

編集

手順4

Remove new motor from package and place in position.
Motor should sit above circuit board with connection prongs facing downward. Additionally, center extrusion on bottom of motor should sit in provided hole.

編集

終わりに

To reassemble your device, follow these instructions in reverse order.

Please dispose of servo motor properly. For recycling information, please contact your local waste management facilities or visit www.recycle.philips.com

5 の人々がこのガイドを完成させました。