メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Hard drive replacement is necessary if your laptop fails to boot or because of hard drive errors. Prior to hard drive replacement, you will need to remove the back panel, both of which are quick, easy tasks.

パーツ

パーツは指定されていません。

  1. Flip the laptop upside down so that the battery is facing away from you.
    • Flip the laptop upside down so that the battery is facing away from you.

    • Battery removal is not necessary to complete this guide.

  2. Locate the three 3 mm Phillips #0 screws on the back panel. Remove each screw using a small Phillips #0 screwdriver.
    • Locate the three 3 mm Phillips #0 screws on the back panel.

    • Remove each screw using a small Phillips #0 screwdriver.

  3. 今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る

    今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る
  4. Using a small plastic opening tool, pry off the back casing starting at a point closest to you and working around the perimeter of the case.
    • Using a small plastic opening tool, pry off the back casing starting at a point closest to you and working around the perimeter of the case.

  5. After removing the back panel, locate the hard drive located to the far left. It is distinguishable from other parts based on it's rectangular shape.
    • After removing the back panel, locate the hard drive located to the far left. It is distinguishable from other parts based on it's rectangular shape.

  6. Remove the four 3.5 mm Phillips #0 screws attached on the four corners of the hard drive. Remove the four 3.5 mm Phillips #0 screws attached on the four corners of the hard drive.
    • Remove the four 3.5 mm Phillips #0 screws attached on the four corners of the hard drive.

  7. Slide the hard drive to the left. Grip the hard drive on both sides and proceed to lift up to remove the hard drive.
    • Slide the hard drive to the left.

    • Grip the hard drive on both sides and proceed to lift up to remove the hard drive.

終わりに

To reassemble your device, follow these instructions in reverse order.

kevin hull

メンバー登録日: 2016年10月05日

207 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 20-5, Livingston Fall 2016 Cal Poly, Team 20-5, Livingston Fall 2016人のメンバー

CPSU-LIVINGSTON-F16S20G5

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 20

今までの合計 1,016