Skip to main content

ガイド紹介

This guide will show how to remove and install ram card in your Edge 15. This can be used to replace a broken card or to add more ram to increase the ram in your computer.

  1. With the laptop upside-down, remove all 11 M2 x 6.0mm screws from the cover plate using the Phillips #0 screwdriver.
    • With the laptop upside-down, remove all 11 M2 x 6.0mm screws from the cover plate using the Phillips #0 screwdriver.

  2. Gently lift the cover plate off the body of the laptop, ensuring that it does not pull on any components such as the USB ports.
    • Gently lift the cover plate off the body of the laptop, ensuring that it does not pull on any components such as the USB ports.

  3. Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る

    Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る
  4. Release clips on both sides of ram unit. Release clips on both sides of ram unit.
    • Release clips on both sides of ram unit.

  5. With ram unit now erect use hands to remove unit from its slot. Place new ram unit into the slot and lightly press down to snap it back into place.
    • With ram unit now erect use hands to remove unit from its slot.

    • Place new ram unit into the slot and lightly press down to snap it back into place.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

ryan sanders

メンバー登録日: 2017年09月27日

299 Reputation

2のガイドは作成済み

チーム

Cal Poly, Team S8-G1, Banghart Fall 2017 Cal Poly, Team S8-G1, Banghart Fall 2017人のメンバー

CPSU-BANGHART-F17S8G1

5 メンバー

7のガイドは作成済み

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 5

Past 30 Days: 29

All Time: 682