メインコンテンツにスキップ

はじめに

This guide will allow you to replace the keyboard completely. You may need to remove this in order to replace the screen.

パーツ

パーツは指定されていません。

  1. Before prying up on the cover, you may have to first remove a screw located inside the battery compartment (M2X3) and release the two latches. If you don't release the latches, you may snap the cover.
    • Before prying up on the cover, you may have to first remove a screw located inside the battery compartment (M2X3) and release the two latches. If you don't release the latches, you may snap the cover.

    • Pry up the top of the cover first by using a spudger to wedge in between the cover and base of the computer.

    • Once the spudger is between the cover and the base of the computer, wedge underneath the remaining border surrounding the keyboard.

    • Cracking sounds are normal. Be careful and take your time removing this panel.

  2. Work your fingers underneath the cover. Then, delicately pull the cover off of the computer.
    • Work your fingers underneath the cover. Then, delicately pull the cover off of the computer.

    • The mouse pad is connected to the rest of the computer via two cables underneath the cover. These cables must be unhooked before the cover can be completely removed.

  3. Unhook the cables connected to the mouse pad by flipping up the black tabs that hold either cable in place. Releasing these cables can be done by hand or by using a spudger.
    • Unhook the cables connected to the mouse pad by flipping up the black tabs that hold either cable in place.

    • Releasing these cables can be done by hand or by using a spudger.

  4. Use a spudger to release both clips that hold the keyboard in place.
    • Use a spudger to release both clips that hold the keyboard in place.

  5. Slowly lift the top of the keyboard and then pull the keyboard towards the screen. There are cables attached to the back of the keyboard. To keep from damaging these, do not pull the keyboard completely off.
    • Slowly lift the top of the keyboard and then pull the keyboard towards the screen.

    • There are cables attached to the back of the keyboard. To keep from damaging these, do not pull the keyboard completely off.

  6. Using a spudger, slowly open up the two black clips holding down both cables.
    • Using a spudger, slowly open up the two black clips holding down both cables.

    • Separate the unfastened cables from the base of the computer.

    • Once the cables are detached from the keyboard, you may pull the keyboard away completely and set it aside.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Vishal

メンバー登録日: 2015年09月21日

742 ポイント

6のガイドは作成済み

チーム

IUPUI, Team 2-3, Baechle Fall 2015 IUPUI, Team 2-3, Baechle Fall 2015人のメンバー

IUPUI-BAECHLE-F15S2G3

3 メンバー

8のガイドは作成済み

コメント1件

Very helpful. I changed my xps dell laptop by my self referring this article. It saved me some money which I would have to give for repairing to shop person.

tulipdas - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 15

今までの合計 4,789