はじめに

The bottom plastic cover is held on by 10 JIS #0 screws with a head size of 3.93 mm and a length of 8.46 mm.

パーツ

パーツは必要ありません。

  1. With the laptop closed and the bottom side facing up, slide the two battery latches towards the sides of the laptop. When the latches are unlocked, a small logo resembling an open padlock will become visible.
    • With the laptop closed and the bottom side facing up, slide the two battery latches towards the sides of the laptop.

    • When the latches are unlocked, a small logo resembling an open padlock will become visible.

  2. Grasp the battery from the top and pull upward. Grasp the battery from the top and pull upward.
    • Grasp the battery from the top and pull upward.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Remove the ten 8.6 mm JIS #0 screws. Remove the ten 8.6 mm JIS #0 screws.
    • Remove the ten 8.6 mm JIS #0 screws.

  5. Place fingers underneath cover and pull off the cover.
    • Place fingers underneath cover and pull off the cover.

まとめ

To reassemble your device, follow these instructions in reverse order.

Alec Weiss

メンバー登録日: 2018年11月05日

752 ポイント

8のガイドは作成済み

チーム

IUPUI, Team S2-G2, Baechle Fall 2018 IUPUI, Team S2-G2, Baechle Fall 2018人のメンバー

IUPUI-BAECHLE-F18S2G2

3 メンバー

8のガイドは作成済み

統計データを表示:

過去 24時間: 3

過去 7 日: 6

過去 30 日: 26

今までの合計 85