私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

世界最大のリペアコミュニティに参加しましょう。

Canon Powershot ELPH 100 HS Outer Case Replacement

Canon Powershot ELPH 100 HS Outer Case Replacement

Jacob とその他 8 人の作成者

最終更新日: May 20, 2022

10 - 25 分

とても簡単

はじめに

手順 1 に進む

Hello everyone, this step by step guide will hep you put a new outer case replacement on your Canon Powershot ELPH 100 HS!

必要な工具と部品

ツール

手順1 Outer Case

Canon Powershot ELPH 100 HS Outer Case Replacement, Outer Case: 手順 1、 1の画像 1

Using the Phillips #00 screwdriver, remove the two 3.1mm screws from the bottom of the camera.
Keep track of all the screws that are being taken out from the outer case.
The display screen of the camera should be facing towards you.

手順2

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 2、 1の画像 1

Ensure that the screen is facing you, and then rotate it till you see the screws on the side of the camera.
Use the Phillips #00 screwdriver to remove the two 3.1 mm screws.

手順3

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 3、 2の画像 1

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 3、 2の画像 2

With the screen still facing you, rotate the camera 180 degrees.
The side with the charging port should now be facing up.

手順4

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 4、 2の画像 1

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 4、 2の画像 2

Use the Philips #00 screwdriver to pry open the charging port cover.
Once you pry open the charging port cover, rotate the cover so that you have access to the screw underneath. Which is seen in the next image.
Remove both 3.1 mm screws using the Phillips #00 screwdriver.
The image still shows the screw from step 3 in place.

手順5

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 5、 2の画像 1

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 5、 2の画像 2

Turn the camera so the bottom is once again facing up.
With the battery door still open, use a spudger to remove the cover from the front of the camera.
Carefully go around all of the edges until the cover is released.

手順6

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 6、 1の画像 1

Once the entire front cover has been released carefully pull it off.
Be careful not to break the tabs that hold it in place.

手順7

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 7、 3の画像 1

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 7、 3の画像 2

Canon Powershot ELPH 100 HS Outer Case Replacement: 手順 7、 3の画像 3

Just like Step 4-6 , carefully use the Spudger to remove the back cover.
Go along all the borders of the back cover so that it releases from the camera safely.
Be careful not to break the tabs.

終わりに

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

作成者

8人の作成者と共同で作成されました。

Jacob

メンバー登録日: 03/17/15

570 ポイント

3のガイドは作成済み

+7 個以上のバッジ

チーム

Michigan Tech, Team 1-10, Lauer Spring 2015 Michigan Tech, Team 1-10, Lauer Spring 2015人のメンバー

MTU-LAUER-S15S1G10

2 メンバー

5のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 9

過去 30 日: 34

今までの合計 1,818