評価: 277
2
2
1
Alright so I have 2 PS3s. My friend let me borrow his broken ps3 to try to fix it. The problem is that he unplugged the AC unit during the update. So now I have error code (8002F147). Everytime I tried to restart it, it still went to update. It goes to about 36% then it gives me the error. It's an endless loop of errors.
IS THERE ANY WAY TO FIX THIS BESIDES SENDING IT TO SONY???
この質問は役に立ちましたか？
評価: 10.2千
44
20
47
I found this answer on a forum (link below):
(source: http://forums.demigodthegame.com/386771)
このアンサーは役に立ちましたか？
Yes I seen that. I dont have a SATA cable though so I just tried to update via full format on other PS3. It might work.
Every time I try to update my ps3 to 3.55 firmware it give these error code80028cca
Super slim ?
There is no hard drive on my ps3, what to do
The problem persists in the drive strip make sure its plugged in good and tite on both ends from drive to board i had to add a small thick piece of paper to the stripp to make sure it was snug and make sure the little black lever is up b4 u insert and pressed down when snug i just did this and it installed first try
評価: 2.7千
18
8
6
Hey man as I mentioned before my nephews PS3 had the same problem. All I did to fix it was:
All his saved data as well as media was still there and it is now running fine. I do not think you have to do the whole thermal paste deal but just remove the PRAM battery for a while then try what I did with the HD. I hope this helps. Good luck!!
このアンサーは役に立ちましたか？
I can confirm that this solution will fix the problem. Granted, the PS3 I was working on was giving the 802F1F9 error, but it is worth a shot. I did not do any thermal paste re-application, just removed the small onboard battery for a minute or two, reassembled, and start it first without then with the harddrive. Nice fix. +
can not be formatted if the windows 10
nope still getting the error...
評価: 25
1
Does anyone know where I can get the 3.30 or 3.40 firmware? I'm currently stuck with the same issue. {PS# SLIM 160GB}.
Thanks in advance!
このアンサーは役に立ちましたか？
error code 8002f147 refers to a problem with your disc drive/blue-ray player, if you have recently had it repaired from ylod or other problems that's probably whats done it, there are little plastic clips connecting the lead from the main board to your drive and i bet you find its broke or if its not been fixed lately i think you may need a new drive!!!
このアンサーは役に立ちましたか？
You can't replace the blu-ray drive on a PS3 the motherboard to the drive is married to the motherboard of the console. They are a set that can't be separated and work. Please do a Google on the PS3 error code 8002f147, it is a firmware error.
Nothing has helped. Same error. PS3 slim. I used three new drives. All kinds of formatting. Downloaded newest firmware. It recognizes the drive with firmware and even displayed it on the screen. Still no go. Any ideas?
Thanks.
このアンサーは役に立ちましたか？
Okay hi my ps3 is stuck on updating and it won't come off or reset just keeps coming up with error 8002f334 or nothing what to do please help
このアンサーは役に立ちましたか？
hi,i have problem code error 8002f147 on my ps3 if i update system..
please help me
thanks
このアンサーは役に立ちましたか？
Hi anyone knows about error 8002F271? This does not appear in any of my searches be it goodle or youtube. I need to know first what this error means?
Posted: 10/31/2017
Options
hi,i have problem code error 8002f147 on my ps3 if i update system..
このアンサーは役に立ちましたか？
過去 24時間: 5
過去 7 日: 69
過去 30 日: 327
今までの合計 84,816
3 件のコメント
My nephew just brought me his PS3 today with the same exact problem. I will try messing around with it and I will let you know what happens.
Xnriqu さんによる
Plz let me no the problem too
gregwebb83 さんによる
السلام عليكم اردنا ان نقم بتحديث البلاستيشن ٣ و عندما انتهى التحديث ضهرت رسالة تقول بأنه تم حذف التحديث السابق و يتم التحديث الان من جديد وبعد ان ينتهي من التحديث يكتب فشل و اذا اردت اتصل على 8002f147
كيف اعمل انها عملية متكررة عندما تشتغل يبدأ التحديث مباشرتا ونحن في الوسط اي انه لم يتم التحديث ولم نستطع الخروج من التحديث
خالد الهطالي さんによる