@sinarahnav30084 double check your work. Make sure that the flex cable from the sub board to the main board is properly seated and not torn etc. If in doubt, consider replacing it. The mic is soldered on the sub board.
[image|3196047]
-
If that does not work you will have to check your main board. Follow the Samsung Flowchart
+
If that does not work, you will have to check your main board. Follow the Samsung Flowchart
@sinarahnav30084 double check your work. Make sure that the flex cable from teh sub_board to teh main board is properly seated and not torn etc. If in doubt consider replacing it. The mic is soldered on the sub_board
+
@sinarahnav30084 double check your work. Make sure that the flex cable from the sub board to the main board is properly seated and not torn etc. If in doubt, consider replacing it. The mic is soldered on the sub board.
[image|3196047]
If that does not work you will have to check your main board. Follow the Samsung Flowchart
@sinarahnav30084 double check your work. Make sure that the flex cable from teh sub_board to teh main board is properly seated and not torn etc. If in doubt consider replacing it. The mic is soldered on the sub_board
[image|3196047]
If that does not work you will have to check your main board. Follow the Samsung Flowchart
[image|3196049]
[image|3196050]