メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: oldturkey03

テキスト:

-@esaiboatrig2973 you need the back to be at about 140 deg F for the adhesive to soften. I would suggest either a heat gun and a good thermometer, or a hot plate to accomplish this. The heat has to be consistent and even. cover your camera while you heat it. use someting like this tool https://www.ifixit.com/products/isesamo-opening-tool?pk_campaign={US|Shopping|MiscTools}&pk_source=google&pk_medium=cpc&pk_kwd=&gclid=Cj0KCQjwiIOmBhDjARIsAP6YhSX_AFLzLeDUcSLLQHJm75sCh4BrDZLdEUAlUFBvy7XLJh-yBF9631UaApEwEALw_wcB and leep reapplying the heat. Yes, do were some gloves since it will be unpleasant to hold your phone while doing this.
+@esaiboatrig2973 you need the back to be at about 140 deg F for the adhesive to soften. I would suggest either a heat gun and a good thermometer, or a hot plate to accomplish this. The heat has to be consistent and even. cover your camera while you heat it. use something like this tool [product|IF145-130]|Shopping|MiscTools}&pk_source=google&pk_medium=cpc&pk_kwd=&gclid=Cj0KCQjwiIOmBhDjARIsAP6YhSX_AFLzLeDUcSLLQHJm75sCh4BrDZLdEUAlUFBvy7XLJh-yBF9631UaApEwEALw_wcB and leep reapplying the heat. Yes, do wear some gloves since it will be unpleasant to hold your phone while doing this.

ステータス:

open

編集者: oldturkey03

テキスト:

-@esaiboatrig2973 you need the back to be at about 140 deg F for the adhesive to soften. I would suggest either a heat gun and a good thermometer, or a hot plate to accomplish this. The heat has to be consistent and even. Yes, do were some gloves since it will be unpleasant to hold your phone while doing this.
+@esaiboatrig2973 you need the back to be at about 140 deg F for the adhesive to soften. I would suggest either a heat gun and a good thermometer, or a hot plate to accomplish this. The heat has to be consistent and even. cover your camera while you heat it. use someting like this tool https://www.ifixit.com/products/isesamo-opening-tool?pk_campaign={US|Shopping|MiscTools}&pk_source=google&pk_medium=cpc&pk_kwd=&gclid=Cj0KCQjwiIOmBhDjARIsAP6YhSX_AFLzLeDUcSLLQHJm75sCh4BrDZLdEUAlUFBvy7XLJh-yBF9631UaApEwEALw_wcB and leep reapplying the heat. Yes, do were some gloves since it will be unpleasant to hold your phone while doing this.

ステータス:

open

オリジナル投稿者: oldturkey03

テキスト:

@esaiboatrig2973 you need the back to be at about 140 deg F for the adhesive to soften. I would suggest either a heat gun and a good thermometer,  or a hot plate to accomplish this. The heat has to be consistent and even.  Yes, do were some gloves since it will be unpleasant to hold your phone while doing this.

ステータス:

open