The Motorola Droid 3 is not easy to get apart due to the fact t has no security screws, is a slider, and the display and digitizer are glued together, and the assembly is glued to the phone as well.
+
The Motorola Droid 3 is not easy to get apart due to the fact the little bugger has no security screws, is a slider, and the display and digitizer are glued together, and the assembly is glued to the phone as well.
In the war against adhesive a moderate quality heat gun is your ally, as at softens the adhesive allowing you to remove the components without utterly destroying the fragile plastic housing.
A step by step guide can be found here: [http://www.repairsuniverse.com/motorola-droid-3-screen-repair-take-apart-guide.html|http://www.repairsuniverse.com/motorola-droid-3-screen-repair-take-apart-guide.html]
If you wind up doing this, take photos and document it on iFixit as a giude!
The Motorola Droid 3 is not easy to get apart due to the fact t has no security screws, is a slider, and the display and digitizer are glued together, and the assembly is glued to the phone as well.
In the war against adhesive a moderate quality heat gun is your ally, as at softens the adhesive allowing you to remove the components without utterly destroying the fragile plastic housing.
A step by step guide can be found here: [http://www.repairsuniverse.com/motorola-droid-3-screen-repair-take-apart-guide.html|http://www.repairsuniverse.com/motorola-droid-3-screen-repair-take-apart-guide.html]
If you wind up doing this, take photos and document it on iFixit as a giude!