@Colby Morris Your board is a 820-00045 and that is L7095 which is a 10UH-20%-0.85A-0.46OHM inductor and is part of your regulator circuitry coming off P3VG3H_Boot_RC. So, a short is definitely an option. To find it you will need the schematic as well as a good meter and experience.
+
@Colby Morris Your board is a 820-00045 and that is L7095 which is a 10UH-20%-0.85A-0.46OHM inductor and is part of your regulator circuitry coming off P3VG3H_Boot_RC. So, a short is definitely an option. To find it you will need the schematic as well as a good meter and experience. Looks like the voltages on both sides of the inductor should be 3.3V. Anything higher than that and it’ll get hot pretty quick. You will need to trace the circuitry and check the components along the individual net.
@Colby Morris Your board is a 820-00045 and that is L7095 which is a 10UH-20%-0.85A-0.46OHM inductor and is part of your regulator circuitry coming off P3VG3H_Boot_RC. So, a short is definitely an option. To find it you will need the schematic as well as a good meter and experience.
[image|2595539]