メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: oldturkey03

テキスト:

@werfex so I have to break it into smaller pieces. I will add to this answer with every “block” I identified. Components that are marked as “desolder” cannot be measure in circuit and will have to come off. So you will have to bear with me on those.
[image|2521560]
Also, the components are identical on the next two divided sections so I did not list them separately
[image|2521504]
Capacitor C9D19 8.3uF
Capacitor C9D20 9.22uF
Capacitor C9D21 1uF
Resistor R9D33 2.2 Ohm
Capacitor C9D22 96nF
IC U9D2 AZ6 Dual MOSFET Gate Driver
Resistor R9D32 2.2 Ohm
Transistor Q9D3 4C55N Mosfet
Transistor Q9D2 4C50 RJ31 MOSFET
Resistor R9D31 1.1 Ohm
Capacitor C9D18 1nF
All values are measured so assume a minimum 10% tolerance
….and on the other side is IC U9C2 NCP4205 PMIC VOLTAGE REGULATOR since it looks like you already removed it
+
+=== Update 01/14/2022 ===
+[image|2562372]
+
+Q8D1 G22 transistor in SOT023 package
+
+C9D7 120µF 0805 package
+
+C9D11 1000pF 0603 package
+
+C9D5 120µF 0805 package
+
+Q9D1 MOSFET 7409 GV7 X1E (NTTFS4928N)
+
+C9C21 0.15µf 0603 package
+
+C9C20 38Pf 0805 package
+
+R9C24 50ohm 0402 package
+
+C9C19 45pF 0603 package
+
+R9D15 50ohm 0402 package
+
+R9D14 50ohm 0402 package
+
+R9D17
+
+C9D16 35pF 0603 package
+
+R9D19
+
+C9D10 35pF 0402 package

ステータス:

open

編集者: oldturkey03

テキスト:

@werfex so I have to break it into smaller pieces. I will add to this answer with every “block” I identified. Components that are marked as “desolder” cannot be measure in circuit and will have to come off. So you will have to bear with me on those.
[image|2521560]
Also, the components are identical on the next two divided sections so I did not list them separately
[image|2521504]
Capacitor C9D19 8.3uF
Capacitor C9D20 9.22uF
-Capacitor C9D21 400uF
+Capacitor C9D21 1uF
Resistor R9D33 2.2 Ohm
Capacitor C9D22 96nF
IC U9D2 AZ6 Dual MOSFET Gate Driver
Resistor R9D32 2.2 Ohm
Transistor Q9D3 4C55N Mosfet
Transistor Q9D2 4C50 RJ31 MOSFET
Resistor R9D31 1.1 Ohm
Capacitor C9D18 1nF
All values are measured so assume a minimum 10% tolerance
….and on the other side is IC U9C2 NCP4205 PMIC VOLTAGE REGULATOR since it looks like you already removed it

ステータス:

open

編集者: oldturkey03

テキスト:

@werfex so I have to break it into smaller pieces. I will add to this answer with every “block” I identified. Components that are marked as “desolder” cannot be measure in circuit and will have to come off. So you will have to bear with me on those.
-[image|2521560] Also, the components are identical on the next two divided sections so I did not list them separately
+[image|2521560]
+
+Also, the components are identical on the next two divided sections so I did not list them separately
[image|2521504]
Capacitor C9D19 8.3uF
Capacitor C9D20 9.22uF
Capacitor C9D21 400uF
Resistor R9D33 2.2 Ohm
Capacitor C9D22 96nF
IC U9D2 AZ6 Dual MOSFET Gate Driver
Resistor R9D32 2.2 Ohm
Transistor Q9D3 4C55N Mosfet
Transistor Q9D2 4C50 RJ31 MOSFET
Resistor R9D31 1.1 Ohm
Capacitor C9D18 1nF
All values are measured so assume a minimum 10% tolerance
+
+….and on the other side is IC U9C2 NCP4205 PMIC VOLTAGE REGULATOR since it looks like you already removed it

ステータス:

open

編集者: oldturkey03

テキスト:

-@werfex so I have to break it into smaller pieces. I will add to this answer with every “block” I identified. Components that are marked as “desolder” cannot be measure in circuit and will have to come off. So you will have to bear with me on those. Also, the components are identical on the next two divided sections so I did not list them separately
+@werfex so I have to break it into smaller pieces. I will add to this answer with every “block” I identified. Components that are marked as “desolder” cannot be measure in circuit and will have to come off. So you will have to bear with me on those.
-[image|2521560]
+[image|2521560] Also, the components are identical on the next two divided sections so I did not list them separately
[image|2521504]
Capacitor C9D19 8.3uF
Capacitor C9D20 9.22uF
Capacitor C9D21 400uF
Resistor R9D33 2.2 Ohm
Capacitor C9D22 96nF
IC U9D2 AZ6 Dual MOSFET Gate Driver
Resistor R9D32 2.2 Ohm
Transistor Q9D3 4C55N Mosfet
Transistor Q9D2 4C50 RJ31 MOSFET
Resistor R9D31 1.1 Ohm
Capacitor C9D18 1nF
All values are measured so assume a minimum 10% tolerance

ステータス:

open

オリジナル投稿者: oldturkey03

テキスト:

@werfex so I have to break it into smaller pieces. I will add to this answer with every “block” I identified. Components that are marked as “desolder” cannot be measure in circuit and will have to come off. So you will have to bear with me on those. Also, the components are identical on the next two divided sections so I did not list them separately

[image|2521560]

[image|2521504]

Capacitor    C9D19    8.3uF

Capacitor    C9D20    9.22uF

Capacitor    C9D21    400uF

Resistor    R9D33    2.2 Ohm

Capacitor    C9D22    96nF

IC            U9D2    AZ6 Dual MOSFET Gate Driver

Resistor    R9D32    2.2 Ohm

Transistor    Q9D3    4C55N Mosfet

Transistor    Q9D2    4C50 RJ31 MOSFET

Resistor    R9D31    1.1 Ohm

Capacitor    C9D18    1nF

All values are measured so assume a minimum 10% tolerance

ステータス:

open