現在のバージョン作成者： jayeff
テキスト:
| Hi @braydentoolman , | |
| According to the [http://h10032.www1.hp.com/ctg/Manual/c05381695|maintenance and service guide] (see p.103) a 3:2 error code says: | |
| ''Hardware 3.2 The embedded controller has timed out waiting for BIOS to return from memory initialization''. | |
| Basically you have a memory problem, which you probably already know. | |
| Hopefully you haven’t been removing/replacing the memory module with the power still connected to the PSU as this could have damaged the memory module. | |
| I can’t tell from the video but how many memory modules are there? | |
| '''If there are two ram modules''' try installing only 1 ram module in slot 1 (lower one) and then check if it passes POST (Power On Self Test). If no good try the other ram module and check. | |
| It won’t work if there is only 1 module and it is inserted into slot 2 i.e. the upper slot. | |
| ''Remember to disconnect the power from the PC when changing the ram''. Also check that the module contacts are clean etc. | |
| '''If there is only 1 ram module''' try to reset the BIOS and check if that works. Disconnect the power from the PC and then remove the coin cell battery from the motherboard (note the orientation of the battery- usually it is +ve on top as marked on battery). Then press and hold the PC’s Power On button for a full 30 seconds and then release. Reinsert the coin cell battery and reconnect the power to the PC and turn it on. | |
| ''If it does turn on successfully'' then there may be a message saying that the date and time are incorrect. This is normal as the BIOS has been reset. Once you correct it it won’t show again. | |
| - | If it doesn’t work then you may have to get another memory module just to check if it is the problem or if there is a problem with the motherboard. |
| + | If it doesn’t work then you may have to get another compatible memory module just to check if it is the problem or if there is a problem with the motherboard. |
ステータス:
open
オリジナル投稿者： jayeff
テキスト:
Hi @braydentoolman , According to the [http://h10032.www1.hp.com/ctg/Manual/c05381695|maintenance and service guide] (see p.103) a 3:2 error code says: ''Hardware 3.2 The embedded controller has timed out waiting for BIOS to return from memory initialization''. Basically you have a memory problem, which you probably already know. Hopefully you haven’t been removing/replacing the memory module with the power still connected to the PSU as this could have damaged the memory module. I can’t tell from the video but how many memory modules are there? '''If there are two ram modules''' try installing only 1 ram module in slot 1 (lower one) and then check if it passes POST (Power On Self Test). If no good try the other ram module and check. It won’t work if there is only 1 module and it is inserted into slot 2 i.e. the upper slot. ''Remember to disconnect the power from the PC when changing the ram''. Also check that the module contacts are clean etc. '''If there is only 1 ram module''' try to reset the BIOS and check if that works. Disconnect the power from the PC and then remove the coin cell battery from the motherboard (note the orientation of the battery- usually it is +ve on top as marked on battery). Then press and hold the PC’s Power On button for a full 30 seconds and then release. Reinsert the coin cell battery and reconnect the power to the PC and turn it on. ''If it does turn on successfully'' then there may be a message saying that the date and time are incorrect. This is normal as the BIOS has been reset. Once you correct it it won’t show again. If it doesn’t work then you may have to get another memory module just to check if it is the problem or if there is a problem with the motherboard.
ステータス:
open