メインコンテンツにスキップ

MacBook Pro 15" Retina Display Mid 2012の右側ファンの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての41個のガイドに反映されます。

英語
日本語

手順 3を翻訳中

手順3
MacBook Pro 15" Retina Display Mid 2012 Right Fan Replacement: 手順 0、 2の画像 1 MacBook Pro 15" Retina Display Mid 2012 Right Fan Replacement: 手順 0、 2の画像 2
  • Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Starting at the top of the cable, slide a plastic opening tool under the right fan cable to free it from the logic board.

  • Use caution when freeing the cable, as it is strongly adhered to the logic board.

スパッジャーの先端を使って、右側ファンのリボンケーブルの ZIFソケット 上の固定フラップを持ち上げて裏返します。

固定フラップのヒンジ部分をこじ開けてください。ソケット自体には接触しないでください。

右側ファンケーブルの下に差し込んだプラスチック製の開口ツールをケーブル上部からスライドして、ロジックボードから解放します。

ケーブルを外す際はご注意ください。ロジックボードに多量の接着剤で固定されています。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります