メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての40個のガイドに反映されます。

英語
日本語

手順 2を翻訳中

手順2
Grasp the sides of the AirPort card and lift it up to a shallow angle (5-10˚) to separate the light adhesive adhering it to the logic board. Pull the AirPort card parallel out of its connector on the logic board to remove it.
  • Grasp the sides of the AirPort card and lift it up to a shallow angle (5-10˚) to separate the light adhesive adhering it to the logic board.

  • Pull the AirPort card parallel out of its connector on the logic board to remove it.

MacBook ProからAirPortカードを取り出して、AirPortの薄くなっている端を掴んで、ロジックボードと平行に引っ張ります。

[* black] Grasp the thin sides of the AirPort card and pull parallellift it up to a shallow angle (5-10˚) to separate the light adhesive adhering it to the logic board, removingboard.
[* black] Pull
the AirPort card fromparallel out of its connector on the MacBook Prologic board to remove it.
[* black] Grasp the thin sides of the AirPort card and pull parallellift it up to a shallow angle (5-10˚) to separate the light adhesive adhering it to the logic board, removingboard.
[* black] Pull
the AirPort card fromparallel out of its connector on the MacBook Prologic board to remove it.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります