メインコンテンツにスキップ

Reemplazo de pantalla de iPhone 15

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
スペイン語

手順 1を翻訳中

手順1
iPhone 15 Screen Replacement, Secure the back glass: 手順 0、 3の画像 1 iPhone 15 Screen Replacement, Secure the back glass: 手順 0、 3の画像 2 iPhone 15 Screen Replacement, Secure the back glass: 手順 0、 3の画像 3
Secure the back glass
  • The next four steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down four steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • The Anti-Clamp applies suction to both the screen and the back glass. To open the screen, you need to secure the back glass with tape. You can also check out the full instructions on how to use this tape.

  • Cut two strips of tape, apply them along the long edges of the phone, and fold them over the back glass to secure it.

Los siguientes cuatro pasos muestran el Anti-Clamp, una herramienta que diseñamos para hacer el procedimiento de apertura más fácil. Si no vas a usar el Anti-Clamp, salta cuatro pasos para un método alterno.

Para instrucciones completas de como usar el Anti-Clamp, checa esta guía.

El Anti-Clamp aplica succión a la pantalla y al cristal trasero. Para abrir la pantalla, necesitas asegurar el cristal trasero con cinta. También puedes revisar las instrucciones completas en como usar esta cinta.

Corta dos tiras de cinta, aplícalas a lo largo de los bordes del teléfono, y dóblalas sobre el cristal trasero para asegurarlo.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります