メインコンテンツにスキップ

iPhone 15 Display tauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
ドイツ語

手順 1を翻訳中

手順1
iPhone 15 Screen Replacement, Secure the back glass: 手順 0、 3の画像 1 iPhone 15 Screen Replacement, Secure the back glass: 手順 0、 3の画像 2 iPhone 15 Screen Replacement, Secure the back glass: 手順 0、 3の画像 3
Secure the back glass
  • The next four steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down four steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • The Anti-Clamp applies suction to both the screen and the back glass. To open the screen, you need to secure the back glass with tape. You can also check out the full instructions on how to use this tape.

  • Cut two strips of tape, apply them along the long edges of the phone, and fold them over the back glass to secure it.

Wir haben die Anti-Clamp entwickelt, um das Öffnen von Geräten zu erleichtern. Wenn du sie nicht benutzen willst, überspringe die nächsten vier Schritte und folge einer anderen Methode.

Genaue Anweisungen für die Anti-Clamp findest du hier.

Die Anti-Clamp bringt Zug auf die Glasrückseite und auf das Display. Wenn du nur das Display öffnen willst, musst du die Glasrückseite mit Klebeband festhalten. In dieser Anleitung wird ausführlich beschrieben, wie das geht.

Schneide zwei Klebestreifen zurecht, bringe sie an den langen Kanten des iPhones an, falte sie über die Glasrückseite, um diese zu sichern.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります