White screen of death, "normal" start up

Question

iPhone 6

2014年9月19日に発売されたiPhone 6の修理情報とガイドです。モデル番号 A1549、A1586、A1589。

4994回答すべてを表示

Albert Einstein @washingmachine

評価: 55

2

投稿日: 2016年7月31日

オプション

White screen of death, "normal" start up

My iPhone 6 took a ride in the washing machine the other day, maybe 5 minutes. I immediately turned it off and aired it out, placed it in silica gel, and waited 48 hours.

48 hours transpire and I give it a shot. It works. Flawless. Both appearance and function are good. This goes on for 4 hours, absolutely no issues, and then BOOM in mid use the phone goes black and is "off".

I wait again. Now when I turn my phone on I have a start up screen that is normal (black background white apple), but when the start up is done it goes to the white screen of death rather than the home screen.

TLDR; What is causing wsod on my iPhone 6 (washing machine)?

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

2件の回答

ベストアンサー

Gigabit87898 @gigabit87898

評価: 16.1千

39

92

13

投稿日: 2016年8月1日

オプション

First of all, get a new battery. Then remove the logic board and put it in 91% isopropyl alcohol. Remove all the emi shields and brush gently with toothbrush. Put phone together with new battery and see if it works before you go wasting $300 on a new logic board.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

7 件のコメント:

Good God those logic boards are expensive. Is there a way to test the logic board with a multimeter to rule that out? I would imagine if I see any blown components I can make an easy assumption that the board is done, fingers crossed. I'm going to open it up tonight.

Albert Einstein さんによる2016年8月1日

First just look for any discolored solder or components. The isopropyl bath is always the first thing you should do when repairing water damage.

Gigabit87898 さんによる2016年8月1日

Have the isopropyl and correct tools to take her apart. If I run into any further issues I will follow up, otherwise, thank you!

Albert Einstein さんによる2016年8月1日

If/when I remove the emi sheilds from the logic board am I supposed to put them back on? If so I can't find any info on that.

Albert Einstein さんによる2016年8月1日

I usually don't put them back on. Here's what I usually do to remove them: https://m.youtube.com/watch?v=QQXIAukijG...

Gigabit87898 さんによる2016年8月2日

2件以上のコメントを表示

コメントを追加

Good God those logic boards are expensive. Is there a way to test the logic board with a multimeter to rule that out? I would imagine if I see any blown components I can make an easy assumption that the board is done, fingers crossed. I'm going to open it up tonight. — Albert Einstein
First just look for any discolored solder or components. The isopropyl bath is always the first thing you should do when repairing water damage. — Gigabit87898
Have the isopropyl and correct tools to take her apart. If I run into any further issues I will follow up, otherwise, thank you! — Albert Einstein
If/when I remove the emi sheilds from the logic board am I supposed to put them back on? If so I can't find any info on that. — Albert Einstein
I usually don't put them back on. Here's what I usually do to remove them: https://m.youtube.com/watch?v=QQXIAukijG... — Gigabit87898

Seji the veggie @skimmilk05 評価: 1.9千 7 6 1 · Answer 1 · 2016-08-01T05:36:30-07:00

Seji the veggie @skimmilk05

評価: 1.9千

7

6

1

投稿日: 2016年8月1日

オプション

It might be a dead logic board. I don't think it's a dead display since it's able to normally display the splash screen. You might want to order the iPhone 6のロジックボードの交換.

このアンサーは役に立ちましたか？

はいいいえ

スコア -1

コメントを追加

iPhone 6

White screen of death, "normal" start up

2件の回答

回答を追加する