Hi, i have the read ring of death and i just bought the kit to fix it. However i have watched many toturials on how to fix this and most of them use a heat gun. Is this necessary to do?
この質問は役に立ちましたか？
評価: 782.4千
1.1千
893
2.3千
zachbelmont, it most certainly will yield a higher success if you do. The kit is strictly proving additional pressure on the GPU/CPU to try to close cracks in the solder joints. Combining this with a reflow with a heat gun may just add to a good repair. Check on here step 49 will explain it. Check on here for the reflow guide. Hope this helps, good luck.
ガイド
難易度：
難しい
—
45 minutes - 1 hour
ガイド
難易度：
難しい
—
1 - 3 hours
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 0
過去 30 日: 0
今までの合計 245
