メインコンテンツにスキップ

iPad Mini 3 Wi-Fi LCDシールドプレートの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 26を翻訳中

手順26
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 2の画像 1 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 2の画像 2
  • Once all of the adhesive has been separated, open the front glass like a page in a book and rest it on your workspace.

  • If you plan to reuse the front panel assembly, you will need to replace the display adhesive. Use our display adhesive application guide to reapply your display adhesive and reseal your device.

全ての接着剤を剥がしたら、本のページをめくるようにフロントガラスを開口し、ワークスペースに置きます。

フロントパネルアセンブリを再利用する場合は、ディスプレイ用接着剤を交換する必要があります。ディスプレイ用接着剤の塗布方法ガイドを参照して、ディスプレイ用接着剤を再塗布し、デバイスを再密封してください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります