メインコンテンツにスキップ

Logic Board Removal

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
Logic Board Removal: 手順 0、 3の画像 1 Logic Board Removal: 手順 0、 3の画像 2 Logic Board Removal: 手順 0、 3の画像 3
  • Slide the tip of your opening pick under the right edge of the front-facing camera cable and lift to detach it.

  • If the pick can't slide under the cable, lightly heat the cable with a hair dryer or heat gun to soften the adhesive underneath.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります