メインコンテンツにスキップ

ノートパソコンのサーマルペーストを再塗布する方法

英語
日本語

手順 3を翻訳中

手順3
How to Repaste a Laptop, Unfasten the back cover: 手順 0、 2の画像 1 How to Repaste a Laptop, Unfasten the back cover: 手順 0、 2の画像 2
Unfasten the back cover
  • Use a screwdriver to remove the screws that secure the back cover.

  • Every laptop is different, and the types of fasteners used will vary.

  • Use the most snug-fitting screwdriver or bit size for your laptop.

  • A screwdriver or bit that's either too small or too big can strip the heads of screws. To extract a stripped screw, follow this guide.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your laptop.

ドライバーを使って、バックカバーを固定しているネジを外します。

ノートパソコンは1台1台違うので、使用するネジの種類も異なります。

ドライバーやビットのサイズは、ラップトップに最もフィットするものを使用してください。

ドライバーやビットが小さすぎたり大きすぎたりすると、ネジの頭が取れてしまうことがあります。剥がれたネジを抜くには、このガイドに記載された方法を試してください。

この作業中、各ネジの装着場所を記録し、ノートパソコンを損傷しないように、元の場所に正確に戻してください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります