修理を始めるには コミュニティ ストア

屏幕移除

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

ガイドに戻る
英語
中国語
前の手順 次の手順

手順 3を翻訳中

手順3
Screen Removal, Anti-Clamp instructions: 手順 0、 3の画像 1 Screen Removal, Anti-Clamp instructions: 手順 0、 3の画像 2 Screen Removal, Anti-Clamp instructions: 手順 0、 3の画像 3
Anti-Clamp instructions

  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • If your screen is cracked, cover it with a layer of clear packing tape to help the suction cup adhere.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Slide the arms over either the left or right edge of your phone.

  • Position the suction cups near the bottom edge of the phone—one on the front, and one on the back.

  • Squeeze the cups together to apply suction.

  • If you find that the surface of your phone is too slippery for the Anti-Clamp to hold onto, you can use tape to create a grippier surface.

反向钳使用指南

接下来的3个步骤演示了如何使用反向钳，一个旨在简化打开过程的工具。 如果你不使用 反向钳，请跳过这3个步骤以使用替代方法。

有关如何使用 反向钳的完整说明，请查看本指南。

如果屏幕有裂缝，请用透明胶带覆盖，以帮助吸盘吸附。

将蓝色手柄拉向铰链以解锁反向钳的手臂。

将反向钳手臂滑过手机的左边缘或右边缘。

将吸盘放在靠近手机底部边缘的位置——一个在正面，一个在背面。

向下推吸盘以将吸力施加到所需区域。

如果发现设备表面太光滑而反向钳无法吸住，请使用包装胶带来创造一个更容易抓握的表面。

[title] Anti-Clamp instructions
-[* icon_note] The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down three steps for an alternate method.***
+[* icon_note] The next three steps demonstrate the [product|IF145-513|Anti-Clamp], a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down three steps for an alternate method.***
[* icon_note] For complete instructions on how to use the Anti-Clamp, [guide|152309|check out this guide|new_window=true].
[* icon_note] If your screen is cracked, cover it with a layer of clear packing tape to help the suction cup adhere.
[* black] Pull the blue handle backwards to unlock the Anti-Clamp's arms.
[* black] Slide the arms over either the left or right edge of your phone.
[* black] Position the suction cups near the bottom edge of the phone—one on the front, and one on the back.
[* black] Squeeze the cups together to apply suction.
[* icon_note] If you find that the surface of your phone is too slippery for the Anti-Clamp to hold onto, you can [guide|159595|use tape|new_window=true] to create a grippier surface.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。