修理を始めるには コミュニティ ストア

스크린 분리하기

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての15個のガイドに反映されます。

ガイドに戻る
英語
韓国語
前の手順 次の手順

手順 2を翻訳中

手順2
Screen Removal, Anti-Clamp instructions: 手順 0、 3の画像 1 Screen Removal, Anti-Clamp instructions: 手順 0、 3の画像 2 Screen Removal, Anti-Clamp instructions: 手順 0、 3の画像 3
Anti-Clamp instructions

  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • If your screen is cracked, cover it with a layer of clear packing tape to help the suction cup adhere.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Slide the arms over the right edge of your phone.

  • Position the suction cups near the middle of the right edge of the phone—one on the front, and one on the back.

  • Squeeze the cups together to apply suction.

  • If you find that the surface of your phone is too slippery for the Anti-Clamp to hold onto, you can use tape to create a grippier surface.

Anti-Clamp/안티-클램프 지침

다음 세 단계는 여는 절차를 더 쉽게 하기 위해 고안된 도구 안티-클램프에 대한 설명입니다. 안티-클램프를 사용하지 않는다면 세 단계를 건너뛰고 다른 방법을 사용하세요.

안티-클램프 사용법에 대한 전체 지침은 이 안내서를 확인하세요.

화면에 금이 간 경우 투명 포장 테이프를 붙여 흡입 컵이 잘 붙을 수 있도록 하세요.

파란색 손잡이를 뒤로 당겨 안티-클램프의 팔을 잠금 해제하세요.

팔을 휴대폰의 오른편 가장자리 위로 밀어 주세요.

흡입 컵을 휴대폰의 오른편 가장자리 중앙에 배치하세요—전면에 하나, 후면에 하나.

컵을 함께 꽉 쥐고 흡착하세요.

휴대폰 표면이 너무 미끄러워 안티-클램프가 잘 고정되지 않으면 테이프를 사용하여 표면에 더 잘 고정되게 할 수 있습니다.

[title] Anti-Clamp instructions
-[* icon_note] The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down three steps for an alternate method.***
+[* icon_note] The next three steps demonstrate the [product|IF145-513|Anti-Clamp], a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down three steps for an alternate method.***
[* icon_note] For complete instructions on how to use the Anti-Clamp, [guide|152309|check out this guide|new_window=true].
[* icon_note] If your screen is cracked, cover it with a layer of clear packing tape to help the suction cup adhere.
[* black] Pull the blue handle backwards to unlock the Anti-Clamp's arms.
[* black] Slide the arms over the right edge of your phone.
[* black] Position the suction cups near the middle of the right edge of the phone—one on the front, and one on the back.
[* black] Squeeze the cups together to apply suction.
[* icon_note] If you find that the surface of your phone is too slippery for the Anti-Clamp to hold onto, you can [guide|159595|use tape|new_window=true] to create a grippier surface.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。