メインコンテンツにスキップ

iPhone Xの充電パッド/ボリュームボタンアセンブリの交換

注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

手順3
iPhone X Charging Pad / Volume Button Assembly Replacement, Move the Ring/Silent Switch: 手順 0、 1の画像 1
Move the Ring/Silent Switch
  • If you are replacing the button assembly, you will need to transfer the ring/silent switch from the old assembly to the new one.

  • See the iPhone X Power and Audio Exterior Buttons guide for instructions on how to remove the exterior switch from the button assembly.

ボタンアセンブリを交換する場合、古いアセンブリから新しいアセンブリに着信/サイレントスイッチを移す必要があります。

ボタンアセンブリから外装スイッチを取り外す方法については、iPhone Xの電源とオーディオ外部ボタンを参照してください

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります