メインコンテンツにスキップ

Valve Index Headset Motherboard Replacement

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
イタリア語

手順 6を翻訳中

手順6
Valve Index Headset Motherboard Replacement: 手順 0、 2の画像 1 Valve Index Headset Motherboard Replacement: 手順 0、 2の画像 2
  • Use the flat end of a spudger to disconnect the press connector from the bottom-left corner of the motherboard.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります