メインコンテンツにスキップ

iPad Pro 10.5インチ 開封の手順

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 12を翻訳中

手順12
iPad Pro 10.5" Opening Procedure, Disconnect the battery: 手順 0、 1の画像 1
Disconnect the battery
  • Be careful when you isolate the battery using a battery blocker. The battery contacts are easily bent or broken, resulting in irreversible damage.

  • To disconnect the battery, slide one prong of a battery blocker or the tip of an opening pick under the battery power connector to ensure the power circuit is interrupted.

  • Don't push the battery blocker underneath the connector with excessive force. If you're having trouble fitting the battery blocker underneath the logic board, you can try using a playing card to disconnect the battery instead.

  • The battery blocker or playing card ideally should slide under the logic board without encountering any blockages.

  • Leave the battery blocker in place as you work.

バッテリーブロッカーを使って、バッテリーを絶縁する際はご注意ください。バッテリーのコンタクトは簡単に曲がったり、破損します。結果として取り返しのつかないダメージにつながることがあります。

バッテリーを外すには、バッテリーブロッカーの片方の突起、または開口ピックの先端をバッテリーの電源コネクタの下にスライドさせ、電源回路を確実に遮断します。

バッテリーブロッカーをコネクタの下に無理に押し込まないでください。バッテリーブロッカーがロジックボードの下に入らない場合は、トランプを使ってバッテリーを外してみてください。

バッテリーブロッカーやトランプは、理論的にはロジックボードの下に何の障害もなく滑り込ませることができるはずです。

バッテリーブロッカーはそのままにして作業を続けてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります