Xbox Series X Optical Drive Replacement

ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

ガイドに戻る

英語

中国語

前の手順次の手順

手順 7を翻訳中

手順7

Xbox Series X Optical Drive Replacement, Desolder the two wires: 手順 0、 2の画像 1

Xbox Series X Optical Drive Replacement, Desolder the two wires: 手順 0、 2の画像 2

Desolder the two wires

Use a soldering iron to desolder the red wire in the corner of the optical drive board.
Then, desolder the adjacent black wire. Use a pair of blunt tweezers to hold and pull away the wires from the board.
Follow general soldering safety guidelines such as wearing eye protection, working in a well-ventilated area, and washing your hands with soap and water after soldering.
Excessive heat may damage electrical components. Don't apply the soldering iron to the board for long periods of time.
When you install the original board into the replacement optical drive, solder the red wire to the solder pad labeled R. Solder the black wire to the solder pad labeled B.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。