修理を始めるには コミュニティ ストア

Sostituzione gruppo struttura centrale Xbox Series X

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての17個のガイドに反映されます。

ガイドに戻る
英語
イタリア語
前の手順 次の手順

手順 2を翻訳中

手順2
Xbox Series X Center Chassis Assembly Replacement: 手順 0、 2の画像 1 Xbox Series X Center Chassis Assembly Replacement: 手順 0、 2の画像 2

  • Use a pair of tweezers to pull up on the black plastic pull tab to disconnect the USB port cable.

  • Pull only on the pull tab, not the cable itself.

  • If the USB port cable feels adhered to the metal chassis, use an apply an iOpener or hair dryer to heat the cable. Depending on your model of Xbox, you may also need to slide an opening pick under the cable to separate the adhesive.

Usa un paio di pinzette per tirare l'aletta in plastica nera per scollegare il cavo della Porta USB.

Tira solo l'aletta, non il cavo stesso.

Se senti il cavo della porta USB incollato alla scocca di metallo, usa un iOpener o scaldalo attentamente con un asciugacapelli per ammorbidire l'adesivo.

[* black] Use a pair of tweezers to pull up on the black plastic pull tab to disconnect the USB port cable.
[* icon_caution] Pull only on the pull tab, not the cable itself.
- [* icon_note] If the USB port cable feels adhered to the metal chassis, [guide|11677|apply an iOpener|new_window=true] or carefully heat it with a hair dryer to soften the adhesive.
+ [* icon_note] If the USB port cable feels adhered to the metal chassis, use an [guide|11677|apply an iOpener|new_window=true] or [guide|157348|hair dryer|new_window=true] to heat the cable. Depending on your model of Xbox, you may also need to slide an opening pick under the cable to separate the adhesive.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。