iMac Intel 27" 2012-2015 Adhesive Strips Replacement

ガイドに戻る

英語

中国語

前の手順次の手順

手順 16を翻訳中

手順16

iMac Intel 27" 2012-2015 Adhesive Strips Replacement, Test your repair: 手順 0、 3の画像 1

iMac Intel 27" 2012-2015 Adhesive Strips Replacement, Test your repair: 手順 0、 3の画像 2

iMac Intel 27" 2012-2015 Adhesive Strips Replacement, Test your repair: 手順 0、 3の画像 3

Test your repair

At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next three steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips.
If you've already verified that your iMac is working correctly and are ready to seal it up, skip to step 18.
Gently insert the display data connector into its socket on the logic board. Be sure to press it straight into the socket, and insert it completely.
Flip the display data connector lock down onto the socket.
Insert the display power connector into its socket on the logic board.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。