Google Pixel 2 Opening Procedure

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての13個のガイドに反映されます。

英語

オランダ語

手順 11を翻訳中

手順11

Use the point of a spudger to lift the display cable connector up and out of its socket on the motherboard.
Avoid touching the motherboard with the tip of your spudger. The components surrounding the socket are fragile.
To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
If any part of your screen doesn't respond to touch after your repair re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.
During reassembly, pause here and replace the adhesive around the edges of the display.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。