メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Remove the four Tri-Point Y00 screws from the back panel of the Joy-Con.
  • Remove the four Tri-Point Y00 screws from the back panel of the Joy-Con.

  • These screws are each 6.2 mm long, but it's still a good idea to keep them organized and make sure they go back in their proper places!

Joy-ConのバックパネルからトライポイントY00ネジを4本外します。

これらの各ネジは長さ6.2 mmですが、それでも紛失しないように整理整頓しておくことをおすすめします。正しい位置に再装着しているか確認してください。

[* orange] Remove the four Tri-Point Y00 screws from the back panel of the Joy-Con.
[* icon_note] These screws are each 6.2 mm long, but itit's still a good idea to [product|IF145-167-4|keep them organized] and make sure they go back in their proper places!
[* icon_note] These screws are each 6.2 mm long, but itit's still a good idea to [product|IF145-167-4|keep them organized] and make sure they go back in their proper places!

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります