修理を始めるには コミュニティ ストア

Nintendo Switch Vervanging van de hoofdtelefoonjack en gamekaartlezer

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。

ガイドに戻る
英語
オランダ語
前の手順 次の手順

手順 3を翻訳中

手順3
Nintendo Switch Headphone Jack and Game Card Reader Replacement: 手順 0、 2の画像 1 Nintendo Switch Headphone Jack and Game Card Reader Replacement: 手順 0、 2の画像 2

  • Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

  • If the touch screen doesn't work and/or game cards aren't detected after reassembly, you might have not fully reconnected this press connector. Carefully disconnect it and try again.

Gebruik de punt van je spudger om de aansluitingen van de hoofdtelefoonjack en de gamekaartlezer in een rechte beweging van het moederbord omhoog te duwen en los te koppelen.

[* black] Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard.
+[* icon_reminder] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.
+[* icon_note] If the touch screen doesn't work and/or game cards aren't detected after reassembly, you might have not fully reconnected this press connector. Carefully disconnect it and try again.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。