メインコンテンツにスキップ

Nintendo Switch Vervanging van de hoofdtelefoonjack en gamekaartlezer

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。

英語
オランダ語

手順 2を翻訳中

手順2
Nintendo Switch Headphone Jack and Game Card Reader Replacement: 手順 0、 2の画像 1 Nintendo Switch Headphone Jack and Game Card Reader Replacement: 手順 0、 2の画像 2
  • Use a pair of tweezers to slide the digitizer cable horizontally out of its connector on the game card reader board.

  • Before inserting the cable during reassembly, make sure the ZIF connector locking flap is flipped up.

  • With the cable parallel to the board, gently slide it into its connector.

  • Don't force the cable into the connector. If it doesn't insert, ensure the locking flap is flipped up, reposition the cable, and try again.

  • If your touchscreen doesn't work after the repair but your Game Card reader does, make sure this cable is properly inserted. If your Game Card reader also doesn't work, check the Game Card connector in the next step instead.

Gebruik een pincet om de aansluiting van de digitizer-kabel horizontaal uit het contact op het bord van de gamekaartlezer te schuiven.

-[* black] Use a pair of tweezers to slide the digitizer cable horizontally out of its connector on the game card reader board.
+[* black] Use a pair of [product|IF145-020|tweezers] to slide the digitizer cable horizontally out of its connector on the game card reader board.
+[* icon_reminder] Before inserting the cable during reassembly, make sure the ZIF connector locking flap is [link|https://guide-images.cdn.ifixit.com/igi/3m3hCiITLE1D5mZN.full|flipped up|new_window=true].
+[* icon_reminder] With the cable ***parallel to the board***, gently slide it into its connector.
+ [* icon_caution] Don't force the cable into the connector. If it doesn't insert, ensure the locking flap is flipped up, reposition the cable, and try again.
+[* icon_note] If your touchscreen doesn't work after the repair but your Game Card reader does, make sure this cable is properly inserted. If your Game Card reader also doesn't work, check the Game Card connector in the next step instead.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります