Microsoft Surface Laptop 3 15" LCD Panel Replacement

ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語

日本語

手順 7を翻訳中

手順7

Soften the left edge adhesive

The adhesive securing the screen to the back cover is very strong and requires a lot of heat before you can create an initial gap.
Note the location of the adhesive we're softening on this step: long strips secure each short edge of the screen.
Apply a heated iOpener to the left edge of the screen for three minutes.
Alternatively, use a heat gun or hair dryer to soften the adhesive. If you're reusing your screen, be careful not to overheat it. Heat it enough so you can barely touch it comfortably.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。