危険
潜在的な危険
この手順に正しく従わない場合は損傷が生じる可能性があります。ご注意のうえ使用し、すべての警告に従ってください。
危険

はじめに

To lift the car, use a Hydraulic Jack. Keeping a car propped up for long periods may cause harm to the car. For safety, use Jacks stands so the car will not fall while you work.

ツール

パーツ

パーツは必要ありません。

  1. Identify the jack point, located directly underneath your car, in the center portion between the front two wheels.
    • Identify the jack point, located directly underneath your car, in the center portion between the front two wheels.

    • Place the Hydraulic Jack beneath the jack point.

    • Pump the lever on the Hydraulic Jack, up and down, until the jack makes contact with the jack point. (Adjust the placement if necessary).

    • Continue pumping the lever until the wheels are two inches off the ground.

    コメントを追加する

  2. Identify the jack points located behind each front tire. Place a Jack Stand underneath both jack points.
    • Identify the jack points located behind each front tire. Place a Jack Stand underneath both jack points.

    • Clear the area underneath the car of people or debris. Make sure the jack stands are properly supporting the car.

    • Slowly rotate the Hydraulic Jack counter-clockwise to lower it. (Half a turn should be enough.)

    • After fully lowering the Hydraulic Jack, remove it from underneath your car.

    コメントを追加する

まとめ

To remove jack stands, follow guide in reverse order, remembering that lowering and raising the Pneumatic Jack require different actions.

Matt Ondriezek

メンバー登録日: 2014年04月14日

444 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 12-35, Maness Spring 2014 Cal Poly, Team 12-35, Maness Spring 2014人のメンバー

CPSU-MANESS-S14S12G35

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 19

今までの合計 643