RCA RCT6272W23 Display Replacement

Use a Phillips #00 screwdriver to remove both 4.1 mm screws at the top of the device which hold it together.

Press the plastic opening tool into the space between the front and back portions of the case.

Run it along the perimeter of the device to unhook the plastic tabs.

Gently pull both sides apart.

Use a soldering iron to remove the soldered connections on the motherboard

Use a philips #00 screwdriver to unscrew the three 4.064mm screws which attach the motherboard to the front of the device.

Use your fingers to pop the three black tabs up to release the flat plastic data transfer cables.

Pull up the motherboard from the rest of the body.

Using a plastic opening tool, pry the battery off of the rest of the body.

Using a spudger, separate the display surface from the front cover.