メインコンテンツにスキップ

Kodak PixPro AZ251 Shutter Button Replacement

必要な工具と部品

  1. Kodak PixPro AZ251 Shutter Button Replacement, Batteries: 手順 1、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement, Batteries: 手順 1、 2の画像 2
    • Slide switch to open lock position.

  2. Kodak PixPro AZ251 Shutter Button Replacement: 手順 2、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement: 手順 2、 2の画像 2
    • Press down on the battery cover and slide outwards to open.

  3. Kodak PixPro AZ251 Shutter Button Replacement: 手順 3、 1の画像 1
    • Remove the batteries.

  4. Kodak PixPro AZ251 Shutter Button Replacement, Back Cover: 手順 4、 3の画像 1 Kodak PixPro AZ251 Shutter Button Replacement, Back Cover: 手順 4、 3の画像 2 Kodak PixPro AZ251 Shutter Button Replacement, Back Cover: 手順 4、 3の画像 3
    • Remove a total of four 5mm JIS #000 screws from around the camera:

    • Two screws from the right side.

    • Two screws from the left side.

  5. Kodak PixPro AZ251 Shutter Button Replacement: 手順 5、 1の画像 1
    • Remove the single 5mm Phillips #00 screw from the bottom.

  6. Kodak PixPro AZ251 Shutter Button Replacement: 手順 6、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement: 手順 6、 2の画像 2
    • Open the flash module.

    • Remove the two 6mm JIS #00 screws found inside of the flash housing.

  7. Kodak PixPro AZ251 Shutter Button Replacement: 手順 7、 3の画像 1 Kodak PixPro AZ251 Shutter Button Replacement: 手順 7、 3の画像 2 Kodak PixPro AZ251 Shutter Button Replacement: 手順 7、 3の画像 3
    • Use a plastic opening tool to pry apart both halves of the camera.

    • Remove the back panel.

  8. Kodak PixPro AZ251 Shutter Button Replacement, LCD Screen: 手順 8、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement, LCD Screen: 手順 8、 2の画像 2
    • Remove these three JIS #000 screws from the control board:

    • 5mm screw.

    • 4mm screw.

    • 2mm screw.

  9. Kodak PixPro AZ251 Shutter Button Replacement: 手順 9、 1の画像 1
    • Pull the small metal switch plate to the side.

  10. Kodak PixPro AZ251 Shutter Button Replacement: 手順 10、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement: 手順 10、 2の画像 2
    • Pry the LCD screen out of the metal housing plate with a plastic opening tool.

  11. Kodak PixPro AZ251 Shutter Button Replacement: 手順 11、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement: 手順 11、 2の画像 2
    • Use a spudger to flip up the retaining flap on the display ribbon cable ZIF socket.

    • Pull the orange cable out of the socket.

  12. Kodak PixPro AZ251 Shutter Button Replacement, Shutter Button: 手順 12、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement, Shutter Button: 手順 12、 2の画像 2
    • Remove one 4mm JIS #000 screw from the top of the camera.

  13. Kodak PixPro AZ251 Shutter Button Replacement: 手順 13、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement: 手順 13、 2の画像 2
    • Using tweezers, disconnect the orange cable connection at the top of the motherboard.

  14. Kodak PixPro AZ251 Shutter Button Replacement: 手順 14、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement: 手順 14、 2の画像 2
    • Pull the mode dial up and off of the camera.

    • Rotate carefully to avoid breaking the screw attaching the top side cover to the main body of the camera.

  15. Kodak PixPro AZ251 Shutter Button Replacement: 手順 15、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement: 手順 15、 2の画像 2
    • Turn camera upside down.

    • Remove the six 2mm JIS #000 screws from the metal base of the shutter button.

  16. Kodak PixPro AZ251 Shutter Button Replacement: 手順 16、 2の画像 1 Kodak PixPro AZ251 Shutter Button Replacement: 手順 16、 2の画像 2
    • Remove the metal base and ribbon cables.

  17. Kodak PixPro AZ251 Shutter Button Replacement: 手順 17、 1の画像 1
    • While holding the shutter button in place, remove the two 4mm JIS #000 screws from the base.

  18. Kodak PixPro AZ251 Shutter Button Replacement: 手順 18、 1の画像 1
    • Remove the plastic base of the shutter button using tweezers by pulling it straight upward.

  19. Kodak PixPro AZ251 Shutter Button Replacement: 手順 19、 1の画像 1
    • Remove the shutter button by pulling it out from the bottom side of the top cover.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Rachel Llewellyn

メンバー登録日: 02/22/18

509 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team S1-G1, Cagle Spring 2018 USF Tampa, Team S1-G1, Cagle Spring 2018人のメンバー

USFT-CAGLE-S18S1G1

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 14

今までの合計 646