Element GC-1020 Battery Replacement

はじめに

The battery in the GC-1020 device have two wires soldered (similar to being glued) to the logic board. It is fragile and needs to be handled with care.

必要な工具と部品

手順1 Back Cover Replacement Guide

Element GC-1020 Battery Replacement, Back Cover Replacement Guide: 手順 1、 1の画像 1

Unscrew the four screws (size: 3.175mm) on the left and right side of the Element Electronics GC-1020 device using the PH#0 screwdriver.

編集

手順2

Carefully pull the back of the device (the silver portion) apart from the rest of the device.
If you pull back too forcefully the power button would move out of place.

編集

手順3 Battery

Element GC-1020 Battery Replacement, Battery: 手順 3、 2の画像 1

Element GC-1020 Battery Replacement, Battery: 手順 3、 2の画像 2

Then remove the battery from the device through soldering the black and red wires connected to the motherboard.
This replacement will require a soldering station.
To find out more on soldering refer to the Soldering and Desolder page to help you through this process.