リペアコミュニティに参加 - アカウントの作成

はじめに

If the motor of your Dewalt DCD778 is not operating properly or not operating at all, this guide will show you how to replace the motor of your drill.

必要な工具と部品

手順1 Battery

Dewalt DCD778 Motor Replacement, Battery: 手順 1、 1の画像 1

Grab the drill in one hand and cup the battery (located at the bottom of the drill) with the other hand.

翻訳

FixBotに聞いてみる

手順2

Use your other hand to push down on the yellow button on the battery.

翻訳

FixBotに聞いてみる

手順3

Pull the battery in a horizontal direction away from the drill.

翻訳

FixBotに聞いてみる

手順4 Motor

Dewalt DCD778 Motor Replacement, Motor: 手順 4、 2の画像 1

Dewalt DCD778 Motor Replacement, Motor: 手順 4、 2の画像 2

Remove the eight 16 mm, Torx Security #15 screws.

翻訳

FixBotに聞いてみる

手順5

Lay the drill on its side and gently lift the top half off it.

翻訳

FixBotに聞いてみる

手順6

Lift the drill mechanism out of the shell.
Desolder the red and black wires from the motor.

翻訳

FixBotに聞いてみる

手順7

Slightly twist and pull motor away from the clutch.

翻訳

FixBotに聞いてみる

手順8

When installing the replacement motor into the clutch make sure you correctly align the gears in order to assure that the motor is properly fitted to the clutch.

翻訳

FixBotに聞いてみる