はじめに
We are defining the DJI Mini 2 drone body as the top and bottom plastic panels of the drone. These panels are the blockaded between the insides of the drone and the outside world.
The drone body stores the inner electronic parts of the drone like the GPS, the Main Board, and the wires the drone uses. Damage to the drone body can cause the drone to be unstable in flight. If the body of the drone is damaged they will need to be replaced.
必要な工具と部品
-
-
-
Face the DJI Mini 2 away from you so that you are looking at the charging ports.
-
Use your finger to open up the back panel.
FixBotに聞いてみる
-
-
-
Pinch the locking mechanism on the battery to release the lock.
-
Pull the battery straight out of the compartment.
-
-
-
-
-
Unfold the wings of the drone.
-
Place the drone upside down on a flat surface.
-
-
-
-
Flip the drone back over.
-
Use a combination of the opening tool and your fingers to pry open the top panel of the drone along the seams.
-
-
-
Remove the two 5 mm J000 screws located in the battery hatch and near the ports on the back of the drone.
-
-
-
Flip the drone over again.
-
Pry off the bottom panel of the drone using the opening tools and your fingers.
-
-
To reassemble your device, follow these instructions in reverse order.
13 の人々がこのガイドを完成させました。
チーム
UMass Dartmouth, Team F-1, Gurgel Spring 2022 UMass Dartmouth, Team F-1, Gurgel Spring 2022人のメンバー
UMASSD-GURGEL-S22SFG1
2 メンバー
20のガイドは作成済み
4件のガイドコメント
Where to buy a new drone body ?
Loïc Sarda - 返信 共有
Bonjour je suis novice ici j'aime beaucoup se que vous faites et je me demandais comment. M'inscrire ou vous rejoindre
Jojo Mignon - 返信 共有
