Alienware AW610M Mouse Feet Replacement

リペアコミュニティに参加 - アカウントの作成

はじめに

If your Alienware AW610M mouse cursor moves erratically, lags, or stops responding, the problem might not be the sensor; it could be the mouse feet. This guide will show you how to replace the mouse feet on your Alienware AW610M to get smooth movement and accurate cursor tracking. For additional details to prepare for replacing the mouse feet, try visiting the "Cursor Tracking Does Not Work" troubleshooting page.

必要な工具と部品

手順1 Mouse Feet

Alienware AW610M Mouse Feet Replacement, Mouse Feet: 手順 1、 3の画像 1

Alienware AW610M Mouse Feet Replacement, Mouse Feet: 手順 1、 3の画像 2

Alienware AW610M Mouse Feet Replacement, Mouse Feet: 手順 1、 3の画像 3

Power off the mouse and disconnect any wired connections.

翻訳

手順2

Use a spudger to gently lift and remove the old mouse feet.
If the feet are sticky, try lifting slowly from one corner to avoid tearing them.
Be careful not to scratch the mouse surface or damage the plastic housing.

翻訳

手順3

Take a lint free cloth lightly dampened and clean away any remaining adhesive residue.
Allow the surface to dry completely before applying new feet to ensure proper adhesion.

翻訳

手順4

Alienware AW610M Mouse Feet Replacement: 手順 4、 3の画像 3

Peel the adhesive backing off the new mouse feet. Align the mouse foot with its designated area on the mouse. Press firmly to secure it in place. Repeat steps for bottom mouse foot.
Make sure the feet are properly aligned before pressing, as misalignment can affect mouse performance.

翻訳

手順5

Alienware AW610M Mouse Feet Replacement: 手順 5、 3の画像 3

Power the mouse back on via wired or wireless connection and test the glide and tracking on a smooth surface.
If the mouse still tracks poorly, check the surface or sensor for dust or debris.

翻訳