メインコンテンツにスキップ
リペアコミュニティに参加 - アカウントの作成

Murray® 22-Inch 2-in-1 Self-Propelled Gas Lawn Mower with 140cc Briggs & Stratton® Engine

No drive to wheels

Change the drive belt

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0

1件のコメント:

The front wheel drive stopped working on my Murray 22 inch front drive mower. I couldn't get the cover off the wheel drive. I took off two big and two small screws underneath but the cover would not come off so I took off the blade, removed the 3 nuts on the engine pulley cover, found the belt slipped off the engine pulley. I took off the pulley, watch for the Woodruff key, kind of a trick to get it back into the engine pulley. The belt looked okay. The side of the plastic engine pulley may have to be replaced but I put the belt back on. Reassembled and it worked okay but I will eventually have to get the drive cover off and replace the belt. Any help here?

Jerry in Kentucky.

さんによる

コメントを追加

1 件の回答

Here's a page from the manual that might help. Good luck.

En 2a8a513128c1d33166c65ab81a984af2

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Dennis schweitzer さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 11

過去 30 日: 25

今までの合計 184