修理を始めるには コミュニティ ストア

2020年5月に発売される13インチMacBook Proは、クアッドコアのインテル第8世代Core i5およびi7プロセッサー、インテルIris Plus 645統合グラフィックスを搭載しています。(モデルA2289/EMC3456、Thunderbolt 3ポート2基搭載)

79回答 すべてを表示

オプション

Battery not recognised but works unplugged.

Model: A2289 - MacBook Pro 13" Two Thunderbolt Ports 2020

Cycles: 5

Recently replaced battery with an iFixit one.

The system no longer recognises the battery (and coconutBattery shows NaN SoC), and sleeps when unplugged.

Tried SMC reset, PRAM/NVRAM reset, nothing. Assumed another battery failure.

Then tried disabling sleep entirely with the command

sudo pmset disablesleep 1

and now the MacBook runs perfectly fine on battery power, but the system still doesn't recognise the battery.

Has anyone encountered this issue before, or does anyone have suggestions on what else I can try?

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Beginning at Step 9 of this guide you can see the battery data cable. Make sure that this was transferred over from the original battery to the replacement battery correctly. If this cable isn't properly installed the system will not recognize the battery properly. If you're certain that the battery data cable and the rest of the battery is installed correctly, then I would operate under the assumption that the battery you installed is faulty. Good luck!

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

2 件のコメント:

Or the cable is damaged and needs to be replaced MacBook Pro 13" BMU Flex Cable

さんによる

I just finished a battery replacement on an A1466 MacBook Air and ran into the same problem. Turned out the fix was as easy as opening it back up and reseating the battery connector; on the Air it's a single plug so it's not a one-to-one comparison, but essentially I just hadn't gotten it plugged in fully.

Once the plug was in all the way, everything started working like it should.

さんによる

コメントを追加

回答を追加する

dotxyz さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 7

過去 30 日: 57

今までの合計 57