メインコンテンツにスキップ

Repair guides and service information for Kenmore Dishwashers

15回答 すべてを表示

Issues with Kenmore portable dishwasher

My grandmother has a Kenmore portable dishwasher and it fills with water stops when full but arms never spin seems to skip wash cycle the drains and fills again without the arms spinning again then seems to skip rinse cycle then drains again and starts the drying cycle any help would be appreciated ty

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
5 件のコメント

Hi @davideyler,

What is the model number of the dishwasher?

さんによる

@jayeff not 100% sure I know it's the one with wheels and a wood countertop like piece kinda looks like an old cutting board I should be able to get the model number tomorrow.

さんによる

@davideyler

The model number would help as knowing it then the tech sheet might be found which makes things easier to find out what's happening.

さんによる

I managed to fix it after pulling almost everything underneath it apart so had to have been a clogged filter I cleaned everything out lol now it's running like a champ just like a new one I appreciate all the help guys thx alot

さんによる

I got it fixed I took everything underneath it apart and cleaned everything and put it back together and now it's running like a champ just like a new one had to have been a clogged filter or filters somewhere lol but it's running great thx for all the help guys much appreciated

さんによる

コメントを追加

2件の回答

ベストアンサー

The sequence you describe would point to a plugged filter or a bad pump. Everything works, it times thru the wash and rinse cycle but if the arms don't turn/wash, water is not getting to the arms. They turn from the force of water coming out the holes.

このアンサーは役に立ちましたか?

スコア 0

2 件のコメント:

I've tried looking for all the filters not sure if there's any on the bottom outside of the dishwasher but I'll have to tear it all apart again to double check everything lol

さんによる

If there is NO water coming out the arms then it is probably the pump. A completely blocked filter is unlikely.

さんによる

コメントを追加

I got it fixed I took everything underneath it apart and cleaned everything and put it back together and now it's running like a champ just like a new one had to have been a clogged filter or filters somewhere lol but it's running great thx for all the help guys much appreciated

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

David Eyler さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 13

今までの合計 200